变速箱的设计目的是帮助移动车辆从发动机很少的努力，保持变速箱的清洁和正确操作，确保更长的使用寿命。此外您要知道变速箱维修时要验证自动装置的状态，下面
济南自动变速箱维修人员来讲讲。
The gearbox is designed to help move the vehicle from the engine with little effort, keep the gearbox clean and operate correctly, and ensure a longer service life. In addition, you should know that the status of the automatic device should be verified during the maintenance of the transmission. Next, Jinan automatic transmission maintenance personnel will talk about it.
1.打开引擎盖，检查传动液。大多数车辆都有一个量油尺来检测传动液。一些车辆在变速箱顶部有一个塞子，用来拆卸和检查流体。其他车辆可能被认为是不可使用的，这意味着您不能传输服务。
1. Open the engine hood and check the transmission fluid. Most vehicles have an oil dipstick to check the transmission fluid. Some vehicles have a plug on the top of the transmission to remove and check the fluid. Other vehicles may be considered unusable, which means you cannot transmit services.
2.开车绕过街区。注意传动装置在所有齿轮间的变速。确保换挡时没有延时，这可能导致传输失败。
2. Drive around the block. Pay attention to the speed change of the transmission between all gears. Make sure there is no delay when shifting, which may cause transmission failure.
3.检查泄漏的液体。测试结束后，拿起手电筒，从引擎盖下或车下看一下变速箱。确认在任何位置没有从变速箱漏出液体。
3. Check the leaking liquid. After the test, take the flashlight and look at the gearbox from under the hood or the car. Make sure that there is no fluid leaking from the transmission at any position.
此外保护好变速箱就要在驾驶习惯上面下功夫。
In addition, to protect the gearbox, we must work hard on driving habits.
1.启动车辆，并在助手的帮助下进行试驾。让助手在您操作车辆时监控仪表板，写下传输何时移动以及传输以什么RPM移动。大多数车辆都有转速表，但如果没有转速表，请助手记下变速箱的转速。
1. Start the vehicle and test drive it with the help of an assistant. Have an assistant monitor the instrument panel as you operate the vehicle and write down when the transmission moves and at what RPM. Most vehicles have a tachometer, but if there is no tachometer, ask an assistant to record the speed of the transmission.
2.路测结束后，对记录的数据进行分析。看看每分钟转数或移动速度是多少。
2. After the road test, analyze the recorded data. See how many revolutions per minute or movement speed is.
3.将车辆取出进行另一次试驾。当你换挡时，要努力改变。这可能是加速或减速的关系，你踩多少油门踏板。
3. Take the vehicle out for another test drive. When you shift gears, try to change. This may be the relationship between acceleration and deceleration, and how much accelerator pedal you step on.
This is all about verifying the status of the automatic device during gearbox maintenance. If you have any questions, please come to our website http://www.jnbsx.com Consult!
