车辆是需要定期更换变速箱油的，长期不更换的话，会影响到车辆的正常行驶。手动挡车辆变速箱油的更换周期一般在4至6万公里左右，自动车辆变速箱油的更换周期一般在6至8万公里左右。
The vehicle requires regular replacement of the transmission oil, and if not replaced for a long time, it will affect the normal driving of the vehicle. The replacement cycle for transmission oil in manual vehicles is generally around 40000 to 60000 kilometers, while the replacement cycle for transmission oil in automatic vehicles is generally around 60000 to 80000 kilometers.
更换
济南变速箱油的三大禁忌也就是三大注意事项，三大注意事项如下：
The three Ikh Khorig for changing Jinan transmission oil are the three precautions, which are as follows:
1、不要更换上劣质的变速箱油，劣质的变速箱油中含有过多的杂质，这样变速箱在工作的时候，零部件会受到严重的磨损；
1. Do not replace with inferior transmission oil, as it contains too many impurities, which can cause severe wear and tear on the components of the gearbox during operation;
2、在更换变速箱油之前，需要放出废油，对变速箱的油底壳进行清洗，后再换上新变速箱油，这样变速箱油才会更加的干净，使用寿命也会更长一些；
2. Before replacing the gearbox oil, it is necessary to drain the waste oil, clean the gearbox oil pan, and then replace it with new gearbox oil. This will make the gearbox oil cleaner and have a longer service life;
3、更换完变速箱油后，需要对变速箱零件上的油泥进行清洁，油泥没有及时清理的话，那变速箱的运作会受到一些影响。
3. After replacing the transmission oil, it is necessary to clean the oil sludge on the transmission parts. If the oil sludge is not cleaned in a timely manner, the operation of the transmission will be affected.
变速箱油有两种更换方法，一种是重力法，另一种是循环机法，这两种更换方法各有各的优点和缺点，根据实际情况选择合适的方法。
There are two replacement methods for gearbox oil, one is gravity method and the other is circulating machine method. Each method has its own advantages and disadvantages, and the appropriate method should be selected based on the actual situation.
重力换油也叫做手动换油，操作较为简单，所需费用并不高，且不需要消耗较多的变速箱油，但是换油率会比较低。
Gravity oil change, also known as manual oil change, is relatively simple to operate, does not require high costs, and does not require a significant amount of transmission oil consumption, but the oil change rate will be relatively low.
The oil change rate of the circulating machine is relatively high, reaching over 90%. However, during the replacement process, it requires more oil consumption and the cost will also be higher. If there are any other matters, please come to our website http://www.jnbsx.com consulting service
