济南变速箱维修人员提醒您，自动变速箱打滑主要是指离合器组合后发动机不能完全传递到主动轮上，使车辆难以启动，发动机在行驶或加速时转速过高，但速度较慢的现象。自动变速箱打滑通常伴随离合器打滑。
Jinan gearbox maintenance personnel remind you that the slip of automatic gearbox mainly refers to the phenomenon that the engine cannot be completely transferred to the driving wheel after the clutch is combined, making it difficult for the vehicle to start, and the engine speed is too high but slow when driving or accelerating. Automatic transmission slip is usually accompanied by clutch slip.
当出现故障时，车主应尽快将车辆送往维修站进行维修。但许多车主混在一起，造成变速箱严重损坏。离合器打滑的根本原因是压力片不能牢固地压在从动盘摩擦片上，或者摩擦片的摩擦系数过低。
In case of failure, the owner shall send the vehicle to the maintenance station for maintenance as soon as possible. However, many car owners mixed together, causing serious damage to the gearbox. The root cause of the clutch slipping is that the pressure plate cannot firmly press on the driven plate friction plate, or the friction coefficient of the friction plate is too low.
如果发现摩擦片烧焦、硬化、油腻或过薄，则应视情况进行修复或更换，并检查膜片弹簧的状况，如弹簧的疲劳、开裂和失效等。
If the friction plate is burnt, hardened, greasy or too thin, repair or replace it as appropriate, and check the condition of the diaphragm spring, such as fatigue, cracking and failure of the spring.
离合器打滑也可能是由于压力板或飞轮的变形和磨损，或离合器控制机构的调整不当，导致踏板的自由行程小。对于使用机械式电缆控制机构，电缆可能会卡住、自动调整故障等，也会导致故障。
Clutch slip may also be caused by deformation and wear of the pressure plate or flywheel, or improper adjustment of the clutch control mechanism, resulting in small free stroke of the pedal. For the mechanical cable control mechanism, the cable may be stuck, automatic adjustment failure, etc., which may also lead to failure.
除此之外，离合器主缸中的离合器液压控制机构也会发生故障。对于自动变速箱的打滑故障，除了检查离合器制动器等部件的打滑磨损外，还应注意油压、油泵和阀体。
In addition, the clutch hydraulic control mechanism in the clutch master cylinder will also fail. For the slip failure of automatic transmission, in addition to checking the slip wear of clutch, brake and other components, pay attention to the oil pressure, oil pump and valve body.
What happened to the slip fault of the automatic transmission? The above is the relevant content of the question. If you have any questions, please come to our website http://www.jnbsx.com Look!
