变速箱缓冲片的学术名称为碟形弹簧钢片。由于变速箱国产化后缓冲片设计强度不足，材料轻度不够。导致后期使用松动，导致变速箱倒挡、三挡、五挡的高速挡离合器磨损严重，磨损的真正原因则是缓冲片导致的。那么变速箱缓冲片坏了什么症状？
济南自动变速箱维修人员给您简单分析分析。
The academic name of gearbox buffer plate is dished spring steel plate. Due to the insufficient design strength of the buffer plate after the localization of the gearbox, the material is slightly insufficient. As a result, the later use is loose, causing serious wear of the high speed clutch of the reverse gear, third gear and fifth gear of the transmission. The real cause of wear is the buffer plate. Then what is the symptom of the gearbox buffer broken? Jinan automatic transmission maintenance personnel will give you a simple analysis.
1、汽车挂挡打滑。起步没有力，加速跑不动。
1. The car skids in gear. There is no strength in starting, and I can't run at a faster speed.
2、变速箱异响。行驶中变速箱内部有哒哒咔咔异响声。
2. The gearbox makes abnormal noise. There is a rattling noise inside the transmission during driving.
3、挂入挡位发动机熄火。或入档维、变挡、行驶中有冲击的现象。
3. Put the engine into gear and stop the engine. Or there is impact during shifting, shifting and driving.
自动变速箱缓冲片的作用是缓冲和减震，使驾驶更加舒适，还可减轻长途驾驶后的疲劳感，多用于自动挡汽车上。
The function of the buffer plate of the automatic transmission is to cushion and shock absorption, so as to make driving more comfortable. It can also reduce the fatigue after long distance driving. It is mainly used on automatic transmission vehicles.
自动变速箱挂倒挡，不加油门不走，一加油门起步冲击大。这样的故障很可能是变速箱故障造成的。八成是内部的缓冲片损坏造成的。需要换改进的缓冲片，损坏的铝鼓，重新组装好变速箱才能解决问题。
When the automatic transmission is in reverse gear, it will not move without the fuel valve, and the starting impact of one fuel valve is great. Such failure is likely to be caused by transmission failure. It is probably caused by the damage of the internal buffer plate. It is necessary to replace the improved buffer plate, damaged aluminum drum and reassemble the gearbox to solve the problem.
缓冲片损坏是变速箱通病。损坏的缓冲片会断成这样的好多段主要是缓冲片材质不好，车开一定公里数容易断。换改进的，材质好的缓冲片就能减少再次出现缓冲片损坏的可能。
Damaged buffer is a common fault of the transmission. The damaged buffer will break into many sections, mainly due to the poor material of the buffer, which is easy to break after driving for a certain mileage. Replace it with an improved one, and a good buffer can reduce the possibility of damage to the buffer again.
Every module of the gearbox has a fault. Make sure to repair it like this. If you don't understand, you can ask. We may help determine the fault and reduce the maintenance cost. More relevant content will come to our website http://www.jnbsx.com Consult and understand!
