漏油 ：

　　Oil leakage:

　　密封件老化或制造工艺不良导致密封不良。

　　Poor sealing caused by aging seals or poor manufacturing processes.

　　顿挫 ：

　　Stuck:

　　电磁阀问题，如电磁阀损坏或油变质。

　　Electromagnetic valve issues, such as damaged solenoid valves or deteriorated oil.

　　变速箱油太脏，导致阀体卡滞。

　　The transmission oil is too dirty, causing the valve body to get stuck.

　　冲击 ：

　　to attack:

　　离合器片烧蚀或阀体卡滞。

　　The clutch plate is burned or the valve body is stuck.

　　油过脏，导致阀体卡滞。

　　The oil is too dirty, causing the valve body to get stuck.

　　异响 ：

　　Abnormal noise:

　　轴承、风轮盘、差速器、行星架等部件损坏。

　　Components such as bearings, wind turbine discs, differentials, and planetary carriers are damaged.

　　变速箱内部零件磨损或安装不到位。

　　The internal parts of the gearbox are worn or not installed properly.

　　动力不足 ：

　　Insufficient power:

　　链轮损坏。

　　The sprocket is damaged.

　　油泵损坏或油路堵塞。

　　The oil pump is damaged or the oil circuit is blocked.

　　升挡慢 ：

　　Slow upshift:

　　油压过低或主油路油压不正常。

　　Low oil pressure or abnormal oil pressure in the main oil circuit.

　　强制降挡开关短路。

　　The forced downshift switch is short circuited.

　　无法启动 ：

　　Unable to start:

　　锁止电磁阀损坏或锁止控制阀发卡。

　　The locking solenoid valve is damaged or the locking control valve is stuck.

　　启动无力 ：

　　Startup failure:

　　变速箱内部传感器失效或线路断路。

　　The internal sensor of the gearbox has failed or the circuit is open.

　　换挡冲击 ：

　　Shift impact:

　　离合器片烧蚀或阀体卡滞。

　　The clutch plate is burned or the valve body is stuck.

　　油压过高或液压系统工作不正常。

　　The oil pressure is too high or the hydraulic system is not working properly.

　　油耗大 ：

　　High fuel consumption:

　　变速箱内部泄漏严重。

　　The internal leakage of the gearbox is severe.

　　无倒档 ：

　　No reverse gear:

　　变扭器损坏或电脑版损坏。

　　The torque converter is damaged or the computer version is damaged.

　　无前进档 ：

　　No forward gear:

　　后盖鼓片烧毁或磨片脱落。

　　The back cover drum is burned or the grinding disc falls off.

　　挡位失效、挡位失速、换挡延迟 ：

　　Gear failure, gear stall, gear shift delay:

　　变速箱控制单元损坏或内部传感器失效。

　　The transmission control unit is damaged or the internal sensors are malfunctioning.

　　自动跳挡 ：

　　Automatic gear shifting:

　　变速箱软件长时间未升级或控制单元故障。

　　The transmission software has not been upgraded for a long time or the control unit has malfunctioned.

　　通讯不畅 ：

　　Communication is not smooth:

　　变速箱电脑和其他系统电脑的通信有问题。

　　There is a communication issue between the gearbox computer and other system computers.

　　当自动变速箱出现故障时，建议首先进行专业的故障诊断，以确定具体原因。根据故障原因，可以采取相应的维修措施，如更换密封件、清洗阀体、更换损坏的部件等。如果不熟悉自动变速箱的维修，建议将车辆送至专业的维修店进行检查和维修。

　　When the automatic transmission malfunctions, it is recommended to first conduct professional fault diagnosis to determine the specific cause. According to the cause of the malfunction, corresponding maintenance measures can be taken, such as replacing seals, cleaning valve bodies, replacing damaged components, etc. If you are not familiar with the maintenance of automatic transmissions, it is recommended to take the vehicle to a professional repair shop for inspection and repair.

　　本文由济南自动变速箱维修提供帮助，更多的相关内容请点击：http://www.jnbsx.com希望本文能够为您带来帮助，感谢您的阅读！

　　This article is provided with assistance by Jinan Automatic Transmission Maintenance. For more related content, please click: http://www.jnbsx.com I hope this article can be helpful to you. Thank you for reading!