变速箱维修过程中内部组件的再检怎么做？实际上小总成组装是对变速箱维修过程中内部组件的再检和调整，为总成总成装配的前一道工序，下面
济南变速箱维修人员来讲讲其作业内容包含什么吧。
How to recheck the internal components during gearbox maintenance? In fact, the assembly of small assembly is the re inspection and adjustment of internal components during the gearbox maintenance process. As the previous process of assembly, the Jinan gearbox maintenance personnel will talk about what the work includes.
油泵的组装和检测
Assembly and inspection of oil pump
离合器的组装和间隙调整检测
Clutch assembly and clearance adjustment inspection
换档机构的组装调整检测
Assembly, adjustment and inspection of shift mechanism
阀体的组装检测
Assembly inspection of valve body
差速器的组装调整检测
Differential assembly, adjustment and inspection
行星齿轮机构的组装调整
Assembly and adjustment of planetary gear unit
密封件的保持压力测试
Sealing element holding pressure test
总成组装是装配后一道工序,需要在特殊的工作环境中完成所有组件的位置间隙预紧力等都须严格按照技术规范进行操作总成装配完毕后还要进行静态压力测试，在达到技术标准后才可以进入下一道工序
Assembly is a process after assembly. It is necessary to complete the position, clearance and preload of all components in a special working environment. The operation must be carried out in strict accordance with the technical specifications. After assembly, the static pressure test must be carried out. The next process can only be started when the technical standards are met
总成动态测试是通过测试台模拟汽车的工作对变速箱进行动态测试通过模拟测试可以检测变速箱的各种工作性能，如各种油压数据是否符合技术规范，入档，升档，降档是否平顺，锁止离合器结合释放是否符合要求，是否达到既定的转速，变速箱的冷却流量是否达到标准范围，变速箱运转噪音是否符合要求等等所有测试数据都要进行记录并与标准进行对比，符合要求后才能交付客户装车使用。
The dynamic test of the assembly is a dynamic test of the gearbox by simulating the work of the vehicle on the test bench. Through the simulation test, various working performances of the gearbox can be detected, such as whether various oil pressure data meet the technical specifications, whether the gear in, gear up and gear down are smooth, whether the lock clutch engagement and release meet the requirements, whether the given speed is reached, and whether the cooling flow of the gearbox reaches the standard range, Whether the running noise of the gearbox meets the requirements, etc. All test data shall be recorded and compared with the standard, and can be delivered to the customer for loading and use after meeting the requirements.
How to recheck the internal components during gearbox maintenance? The above is the answer to the question. If you have any questions or needs, please come to our website http://www.jnbsx.com Ask about it!
