没有重大维修,更换自动变速箱油有两种方法:一种是由重力泄油,石油替代率约为40%。另一种方法是使用机器生成的压力,石油在石油管道的传播和散热管道动态替换,油率可达80%以上,操作过程简单、石油完全。
Without major maintenance, there are two ways to change the automatic transmission oil: one is to drain the oil by gravity, and the oil substitution rate is about 40%. Another method is to use the pressure generated by the machine, the transmission of oil in the oil pipeline and the dynamic replacement of the heat dissipation pipeline. The oil rate can reach more than 80%, the operation process is simple and the oil is complete.
自动变速器的保养由变速器的换油机构、美国、日本、欧洲的汽车系统组成,有些汽车用了油,可以去掉油塞换油,换油率40%;无油堵车可清除油底壳,但变速箱中的油难以更换,油率约为50% ~ 60%。
The maintenance of the automatic transmission consists of the oil change mechanism of the transmission, the automobile systems of the United States, Japan and Europe. Some automobiles use oil and can remove the oil plug to change the oil, with the oil change rate of 40%; the oil pan can be removed when there is no oil blockage, but the oil in the transmission is difficult to change, with the oil rate of about 50% - 60%.
济南自动挡维修发现,不及时更换ATF机油容易造成机油变质,粘度降低,增加摩擦片之间的磨损,增加油耗;也容易使油液颗粒增大或产生碎片而堵塞油液,拉动阀体,堵塞柱塞,甚至影响换档。
Jinan automatic gear repair found that not changing the ATF oil in time is easy to cause oil deterioration, viscosity reduction, increase the wear between friction plates, increase fuel consumption; also easy to make the oil particles increase or produce debris to block the oil, pull the valve body, plug the plunger, and even affect the shift.
The above is the detailed introduction of Jinan automatic gearbox maintenance to the oil change mode of automatic gearbox. To learn more, please click http://www.jnbsx.com