说到济南自动变速箱维修，其实有很多事项都需要我们注意，我们不仅需要知道在变速箱维修的过程中需要经历拆卸步骤，下面来讲讲相关事项吧。
When it comes to the maintenance of Jinan automatic transmission, there are many matters that need our attention. We not only need to know that we need to go through the disassembly steps in the process of transmission maintenance. Let's talk about related matters.
变速箱的拆卸步骤：
Disassembly steps of transmission:
①准备好工具及盛放各类零件的小盒,在干净平整的操作台上进行解体.如果没有该车的维修手册,应准备好记录本和做记号的胶布条.
① Prepare tools and small boxes for various parts, and disassemble them on a clean and flat operating platform. If there is no maintenance manual for the vehicle, prepare a record book and a tape for marking
②拆卸应从前部油泵开始，由前至后，由外及里地逐步进行，并随时做好记录。
② The disassembly shall be started from the front oil pump, from front to back, from outside to inside, and records shall be made at any time.
③自动变速器壳体大多用铝合金铸成，拆卸时，严禁使用撬棍和铁器直接敲打。
③ Most of the automatic transmission housings are made of aluminum alloy. When disassembling, it is strictly prohibited to use crowbars and iron tools to directly knock.
④拆卸液控阀体时，应小心仔细，上下阀体分离时要防止滚珠，卡环等掉地，要准确记住正确位置。
④ When disassembling the hydraulic control valve body, be careful. When the upper and lower valve bodies are separated, prevent the balls and snap rings from falling to the ground. Remember the correct position accurately.
⑤拆检单向离合器时，须注意其正确的配装方向，装合时，决不能颠倒。
⑤ When disassembling and inspecting the one-way clutch, pay attention to its correct assembly direction, and never reverse it during assembly.
⑥零件拆卸后，应用汽油洗净，并用低压压缩空气吹干，不得使用易掉纤维的棉纱等擦拭阀类零件。
⑥ After the parts are disassembled, they shall be washed with gasoline and blown dry with low-pressure compressed air. It is not allowed to wipe the valve parts with cotton yarn that is easy to lose fibers.
⑦垫上O型密封圈等易损件原则上拆卸后应更换新件，不得凑合重复使用老公、变形、磨损的易损件。
⑦ In principle, the O-ring and other vulnerable parts shall be replaced after disassembly. It is not allowed to reuse the worn, deformed and worn vulnerable parts.
⑧新离合器片、制动器片应在变速箱油中浸泡，待吸足油后才能装合。
⑧ The new clutch plates and brake plates shall be soaked in the transmission oil, and can be assembled after absorbing enough oil.
⑨阀芯、活塞、密封件等装合时，均应涂上变速箱油。
⑨ When the valve element, piston and seal are assembled, they shall be coated with transmission oil.
⑩装合时，严格按规定力矩拧紧螺钉。
⑩ During assembly, tighten the screws in strict accordance with the specified torque.
如果大家想要自己进行维修，那么如果只是简单更换零件或许可以自己动手，但是如果涉及到变速箱大修，建议各位朋友还是去的维修店进行处理。更多相关内容就来我们网站
http://www.jnbsx.com咨询了解吧！
If you want to repair by yourself, you may be able to do it yourself if you simply replace the parts. However, if it involves the overhaul of the gearbox, I suggest you go to a professional repair shop to deal with it. For more information, please visit our website http://www.jnbsx.com Consult and understand!
